Large Stationary

The state of the art VRLA AGM technology of the EVR batteries assures high reliability for back up systems. These batteries are the optimum to work with electronics devices due to the absence of any gas release, together with important savings in space and maintenance.

Capacity range 150 Ah -300 Ah
VRLA Technology
ABS jar & cover
Optimum response in high rate discharge
10 + years life design
Equalization charges are not requiered

Flat plate design AGM DD batteries gives an optimum performance for high rate energy demand applications. Through years they are considered as the standard in stackable antisiesmic batteries . Their design allows the installation of a power plant on top of it , just with an accessory kit.

Features and Benefits

Capacity range 255-1360 Ah

Antisiesmic Zone 4 (CIRSOC 103)

Exclusive Post Seal system

Polipropilene LOI Jar & Cover (UL94 VO/L.I.28%)

Features and Benefits

Capacity range 255-1360 Ah

Very easy to install

Post sealed exclusive design

Jar & Cover (UL94 VO/L.I.28%)

Features and Benefits

Capacity range 255 -1360 Ah

Antisiesmic zone 4 (CIRSOC 103)

Post seal exclusive design

Polipropilene LOI Jar & Cover (UL94 VO/L.I.28%)

Tubular positive plate with gel electrolyte

Features and Benefits

Capacity range 255- 1360 Ah

Stackable configuration

Exclusive post seal design

Polipropilene LOI Jar & Cover (UL94 VO/L.I.28%)

Tubular positive plate with gel electrolite

Flat plates wet electrolyte YUE batteries are the ideal product for those places where the temperature in an issue . Low watter losses make this product a low maintenance product.

Features and Benefits

Capacity range 160 -220 Ah

Temperature range 20°C to 50 °C

Low antimony alloy grids

Polipropilene heatsealed jar and cover

YS batteries were specifically designed for solar and eolic applications where the battery has to cycle every day and a low maintenance is required.
Plates active material and grid alloys make these products a specific design for deep cycle discharges.

Features and Benefits

Capacity range 110 Ah , 160 Ah and 220 Ah

Temperature range 20 °C to +50 °C

Low watter consumption

Stationary bolt terminals

Polipropilene jar and cover

The Yuasa UXH / NPL are the last innovation in batteries technology. There are lead calcium VRLA AGM batteries with excelent performance giving high operational security.

Caracterísiticas y Beneficios

Capacity range 90 Ah , 100 Ah & 200 Ah

Very low internal resistance

Valve regulated battery

The E95S battery line is the optimum alternative for large solar and eolic systems . The active material inside the tubular tubes of its positive plate gives the battery a better performance giving more cycles and current output.

Features and Benefits

Capacity range 180 - 1750 Ah

High cycling capability , up to 1800 cycles up to 80% DOD

Easy to transport and install

Antiexplosive vent taps

The EnerCell OpzS is a flooded type tubular plate battery which design is the result of many years of experience in wet cells fabrication . The low selfdischarge characteristic makes this battery a low maintenance , reliable unit for all applications .

Caracterísiticas y Beneficios

Capacity range 110 - 3310 Ah

Positive tubular plates

Flame retardant vents

Microporous rubber separators

Brass posts 100% sealed

A superior range of valve regulated batteries, with an impressive extended service life, high energy density and shelf life. Manufactured in a range of compact configurations using pure lead technology, the SBS range offers design felxibility where space is at a premiun.

Caracterísiticas y Beneficios

Capacity: 7.0 Ah - 360 Ah
Design Life: 15 years @ 20° C (68 ° F)
High energy density
Compact Design
UL94-V0 Flame retardant case and cover

Designed specifically for the demands of the evolving telecommunications network, the revolutionary VX series has taken sealed lead acid batteries into a new era. Longevity and the ability to operate in extreme environments are the outstanding features of this range.

20 years @ 25° C (77° F)

Very robust for extreme conditions and high temperature environments

PowerSafe V is the acknowledged world leader in sealed lead acid technology for critical applications. Offering long life with high reliability, PowerSafe V is suitable for a wide variety of applications. Delivering superior performance, while occupying less space than conventional standby batteries, the V series is recognized worldwide as the premium battery for telecom.

Capacity: 22 Ah- 1769 Ah

PowerSafe V Front Terminal

PowerSafe V Front Terminal monobloc´s compact design and standard footprint, suitable for 19", 23" and ETSI racking, gives users the option of increased energy density. Total front access facilitates easy maintenance and installation.

Capacity: 50Ah - 155 Ah

The PowerSafe VE series is designated to offer competitive solutions for the telecommunications and IT markets. Incorporating selected design features for the cost-conscious user, the VE range still offers superior performance by weight and volume.

Capacity: 35 Ah- 500 Ah

Combining tubular and gel electrolyte technology in a VRLA battery, the PowerSafe OPzV series are suitable for long and repeated discharges over prolonged periods, where the need for topping-up is eliminated. The cells can be mounted horizontally or vertically, depending on requirements.

Capacity: 215 Ah - 3170 Ah

A prime choice for combined short duration and long duration applications, particularly the requirements of the utilities market. Because of a unique combination of extra thick positive grids, a square plate format and multi-cell construction, superior performance is guaranteed. Mantainance and inspection is particularly easy due to the individual voltage posts and transparent container.

Capacity: 50 Ah - 200 Ah

Design Life: 20 years @ 25° C (77° F)

Flate plate construction in calcium or antimony alloy grids

The PowerSafe E incorporates a sophisticated combination of plate surface area, plate thickness and volume of electrolyte which optimizeds performance for discharges from one minute to eight hours. This enables it to cope well with more demanding load requirements, providing exceptionally high initial and ending current, separated by a long period of more moderate constant current demand.

Capacity: 200 Ah - 890 A

Design Life: 20 years @ 25° C (77° F)

Providing superior performance for long duration discharges, the PowerSafe F range is the ideal choice for telecommunication central office and switchgear back-up power.

Capacity: 840 Ah-1810 Ah

Relying on tried and tested flooded cell technology, the PowerSafe G has evolved as the standard battery for the telecommunications industry. The clear frame retardant PVC jar casing allows ease of manteinance and inspection.

Capacity: 930 Ah - 3900 Ah

The unique rod design ensures that the Varta VB cell is corrosion resitant and has cycling capabilities approaching those of the tubular plate cell. This feature, together with the use of special low antimony-selenium grid alloy, results in a very powerful, reliable product, with a float life of fifteen to twenty years.

Capacity: 33 Ah - 2037 Ah

DataSafe HR is the ideal source of power to protect vital systems. Thick ribbed ABS plastic containers provide high mechanical strength and superior safety features

200-500 watts/cell in 12 volts configuration

Design Life: 10 years @ 25° C (77° F)

An economical multi-cell flat plate unit, optimized for high performance and providing excellent short duration discharge rates. The DataSafe C product line is ideal for smaller UPS systems that demand the high reliability and long life of a flooded cell.

Capacity: 228- 797 watts/cell

Design Life: 20 years @ 25° C (77° F)

Calcium alloy grids for lowest water loss, resulting in low maintenance costs

Exceptional high rate performance

The DataSafe D calcium flat plate battery offers an economical solution when high rate performance and long cycle life is required. The multi-cell construction requiers fewer units resulting in lower installation costs.

Capacity:594-5248 watts/cell

Design life: 20 years @ 25° C (77° F)

Rated 100 % de capacity at initial discharge

Long life slide lock post seal design

Flame retardant cover and container.

The DataSafe E incorporates a sophisticated combination of plate surface area, plate thickness adn volume of electrolyte which optimizes performance for high rate discharges. The DataSafe E offers single cell design with high power delivery capability.

Capacity:422-3322 watts/cell

Design life: 20 years @ 25° C (77° F)

EVR
The state of the art VRLA AGM technology of the EVR batteries assures high reliability for back up systems. These batteries are the optimum to work with electronics devices due to the absence of any gas release, together with important savings in space and maintenance.	Features and Benefits Capacity range 150 Ah -300 Ah VRLA Technology ABS jar & cover Optimum response in high rate discharge 10 + years life design Equalization charges are not requiered

DD
Flat plate design AGM DD batteries gives an optimum performance for high rate energy demand applications. Through years they are considered as the standard in stackable antisiesmic batteries . Their design allows the installation of a power plant on top of it , just with an accessory kit.	Features and Benefits Capacity range 255-1360 Ah VRLA technology Pb- Ca grids alloy Antisiesmic Zone 4 (CIRSOC 103) Exclusive Post Seal system Polipropilene LOI Jar & Cover (UL94 VO/L.I.28%)

DDI
One of the principal characteristic of the DDI batteries is its flexible design, mostly for those places where the space is a critical issue. The cell and steel tray design achieves the best internal gas recombination efficiency improving the energy performance.	Features and Benefits Capacity range 255-1360 Ah VRLA Technology Pb-Ca grids alloy Very easy to install Post sealed exclusive design Jar & Cover (UL94 VO/L.I.28%)

DGX
Tubular plates in a gel electrolyte give the DGX batteries a high reliable characteristic for large duration deep cycle discharge applications. Specifically designed to support mechanical stress, these cells are prepared to get a power plant installed on top of it just with an accesory kit.	Features and Benefits Capacity range 255 -1360 Ah VRLA Technology Pb-Ca grids alloy Antisiesmic zone 4 (CIRSOC 103) Post seal exclusive design Polipropilene LOI Jar & Cover (UL94 VO/L.I.28%) Tubular positive plate with gel electrolyte

DGXI
The DGXI batteries are designed to meet the hardest requirements with an excelent performance for deep cycle discharge . It gives many configuration alternatives that brings high flexibility for critical room space. El positive tubular plate design increase the active material eficiency and gives better performance for those hard cycling application .	Features and Benefits Capacity range 255- 1360 Ah VRLA Technology Pb-Ca alloy grids Stackable configuration Exclusive post seal design Polipropilene LOI Jar & Cover (UL94 VO/L.I.28%) Tubular positive plate with gel electrolite

YUE
Flat plates wet electrolyte YUE batteries are the ideal product for those places where the temperature in an issue . Low watter losses make this product a low maintenance product.	Features and Benefits Capacity range 160 -220 Ah Temperature range 20°C to 50 °C Low antimony alloy grids PVC separators Stationary post Polipropilene heatsealed jar and cover
		12-160

		12-220


YS
YS batteries were specifically designed for solar and eolic applications where the battery has to cycle every day and a low maintenance is required. Plates active material and grid alloys make these products a specific design for deep cycle discharges.	Features and Benefits Capacity range 110 Ah , 160 Ah and 220 Ah Temperature range 20 °C to +50 °C Low Sb grid alloy Low watter consumption Stationary bolt terminals Polipropilene jar and cover
		12-160

		12-220

UXH / NPL
The Yuasa UXH / NPL are the last innovation in batteries technology. There are lead calcium VRLA AGM batteries with excelent performance giving high operational security.	Caracterísiticas y Beneficios Capacity range 90 Ah , 100 Ah & 200 Ah High energy density Very low internal resistance Valve regulated battery ABS jar and cover

E95S
The E95S battery line is the optimum alternative for large solar and eolic systems . The active material inside the tubular tubes of its positive plate gives the battery a better performance giving more cycles and current output.	Features and Benefits Capacity range 180 - 1750 Ah Low Maintenance High cycling capability , up to 1800 cycles up to 80% DOD Easy to transport and install Antiexplosive vent taps

PowerSafe OPzS
The EnerCell OpzS is a flooded type tubular plate battery which design is the result of many years of experience in wet cells fabrication . The low selfdischarge characteristic makes this battery a low maintenance , reliable unit for all applications .	Caracterísiticas y Beneficios Capacity range 110 - 3310 Ah Positive tubular plates Flame retardant vents Microporous rubber separators Brass posts 100% sealed SAN Jar and cover

PowerSafe SBS
A superior range of valve regulated batteries, with an impressive extended service life, high energy density and shelf life. Manufactured in a range of compact configurations using pure lead technology, the SBS range offers design felxibility where space is at a premiun.	Caracterísiticas y Beneficios Capacity: 7.0 Ah - 360 Ah Design Life: 15 years @ 20° C (68 ° F) High energy density Compact Design UL94-V0 Flame retardant case and cover

PowerSafe VX
Designed specifically for the demands of the evolving telecommunications network, the revolutionary VX series has taken sealed lead acid batteries into a new era. Longevity and the ability to operate in extreme environments are the outstanding features of this range.	Features and Benefits Capacity: 100 Ah Design life: 20 years @ 25° C (77° F) 10 years @ 40° C(104°F) Very robust for extreme conditions and high temperature environments Front terminal connection for ease of installation UL94-V0 Flame retardant case and cover

PowerSafe V
PowerSafe V is the acknowledged world leader in sealed lead acid technology for critical applications. Offering long life with high reliability, PowerSafe V is suitable for a wide variety of applications. Delivering superior performance, while occupying less space than conventional standby batteries, the V series is recognized worldwide as the premium battery for telecom.	Features and Benefits Capacity: 22 Ah- 1769 Ah Design Life: 12+ years @ 20° C (68 ° F) World proven Superior reliability Long service life UL94-V0 Flame retardant case and cover

PowerSafe V Front Terminal
PowerSafe V Front Terminal monobloc´s compact design and standard footprint, suitable for 19", 23" and ETSI racking, gives users the option of increased energy density. Total front access facilitates easy maintenance and installation.	Features and Benefits Capacity: 50Ah - 155 Ah Design Life: 15 years @ 20° C (68 ° F) World proven Superior reliability Front terminal connection for ease of installation Long service life UL94-V0 Flame retardant case and cover

PowerSafe VE
The PowerSafe VE series is designated to offer competitive solutions for the telecommunications and IT markets. Incorporating selected design features for the cost-conscious user, the VE range still offers superior performance by weight and volume.	Features and Benefits Capacity: 35 Ah- 500 Ah Design Life: 10-12 years @ 20° C (68 ° F) Competitive High performance Long service life

PowerSafe OPzV
Combining tubular and gel electrolyte technology in a VRLA battery, the PowerSafe OPzV series are suitable for long and repeated discharges over prolonged periods, where the need for topping-up is eliminated. The cells can be mounted horizontally or vertically, depending on requirements.	Features and Benefits Capacity: 215 Ah - 3170 Ah Design Life: 15 years @ 20° C (68 ° F) No water addition required Long service life 1200 cycles to 80% DPD

PowerSafe C
A prime choice for combined short duration and long duration applications, particularly the requirements of the utilities market. Because of a unique combination of extra thick positive grids, a square plate format and multi-cell construction, superior performance is guaranteed. Mantainance and inspection is particularly easy due to the individual voltage posts and transparent container.	Features and Benefits Capacity: 50 Ah - 200 Ah Design Life: 20 years @ 25° C (77° F) Flate plate construction in calcium or antimony alloy grids Space efficient
		calcium

		antimony

PowerSafe E
The PowerSafe E incorporates a sophisticated combination of plate surface area, plate thickness and volume of electrolyte which optimizeds performance for discharges from one minute to eight hours. This enables it to cope well with more demanding load requirements, providing exceptionally high initial and ending current, separated by a long period of more moderate constant current demand.	Features and Benefits Capacity: 200 Ah - 890 A Design Life: 20 years @ 25° C (77° F) Flate plate construction in calcium or antimony alloy grids
		calcium

		antimony

PowerSafe F
Providing superior performance for long duration discharges, the PowerSafe F range is the ideal choice for telecommunication central office and switchgear back-up power.	Features and Benefits Capacity: 840 Ah-1810 Ah Design Life: 20 years @ 25° C (77° F)
		calcium

		antimony

PowerSafe G
Relying on tried and tested flooded cell technology, the PowerSafe G has evolved as the standard battery for the telecommunications industry. The clear frame retardant PVC jar casing allows ease of manteinance and inspection.	Features and Benefits Capacity: 930 Ah - 3900 Ah Design Life: 20 years @ 25° C (77° F) Small footprint for large central offices Flame retardant clear container Flat plate construction in calcium or antimony alloy grids
		calcium

		antimony

Varta VB
The unique rod design ensures that the Varta VB cell is corrosion resitant and has cycling capabilities approaching those of the tubular plate cell. This feature, together with the use of special low antimony-selenium grid alloy, results in a very powerful, reliable product, with a float life of fifteen to twenty years.	Features and Benefits Capacity: 33 Ah - 2037 Ah Design Lefe: 15-20 years @ 20° C (68 ° F) Unique rod plate design Cycling capability Long service life

DataSafe HR
DataSafe HR is the ideal source of power to protect vital systems. Thick ribbed ABS plastic containers provide high mechanical strength and superior safety features	Features and Benefits Capacity: 200-500 watts/cell in 12 volts configuration 780 watts/cell in 6 volts configuration Design Life: 10 years @ 25° C (77° F) UL recognized V0 frame retardant ABS material

DataSafe C
An economical multi-cell flat plate unit, optimized for high performance and providing excellent short duration discharge rates. The DataSafe C product line is ideal for smaller UPS systems that demand the high reliability and long life of a flooded cell.	Features and Benefits Capacity: 228- 797 watts/cell Design Life: 20 years @ 25° C (77° F) Calcium alloy grids for lowest water loss, resulting in low maintenance costs Exceptional high rate performance

DataSafe D
The DataSafe D calcium flat plate battery offers an economical solution when high rate performance and long cycle life is required. The multi-cell construction requiers fewer units resulting in lower installation costs.	Features and Benefits Capacity:594-5248 watts/cell Design life: 20 years @ 25° C (77° F) Rated 100 % de capacity at initial discharge Long life slide lock post seal design Flame retardant cover and container.

DataSafe E
The DataSafe E incorporates a sophisticated combination of plate surface area, plate thickness adn volume of electrolyte which optimizes performance for high rate discharges. The DataSafe E offers single cell design with high power delivery capability.	Features and Benefits Capacity:422-3322 watts/cell Design life: 20 years @ 25° C (77° F)


To read this bochures you must have Acrobat Reader installed in your PC. If you´d like to download this software, please click here: